Most alarm frustration is bad installation: sensors in the wrong place, sensitivities at factory defaults, zones that don't match how you live. HYVE configures every alarm to your home and backs it with real 24/7 monitoring — across Utah, Colorado, and Idaho.
The brain of the system talks to the monitoring center over cellular, not just WiFi. Cut the cable and it still sends.
Every door and reachable window gets a contact — mounted tight, tested, and labeled so the operator knows exactly which door opened.
Pet-immune where you have pets, aimed away from vents and sunlit windows, and set to your floor plan instead of the default.
For sliders, basement windows, and street-facing glass where a contact alone won't catch a smash-and-grab.
Monitored smoke, carbon monoxide, and water-leak sensors ride on the same panel, so one system covers burglary, fire, and flood.
Arm from the keypad, your phone, or automatically when the last person leaves the geofence. Disarm with a code you can revoke anytime.
| HYVE Alarm | Self-install kit | |
|---|---|---|
| Sensor placement | Designed to your floor plan by a licensed tech | Wherever the adhesive sticks |
| Signal path | Cellular + WiFi | WiFi only — cut the internet, kill the alarm |
| Monitoring | UL-listed center, live operators, verified dispatch | Push notification you may not see |
| False alarms | Zones tuned and tested on install day | Factory sensitivity, pets trip it, you stop arming it |
| Contract | None, ever | Often none — but no support either |
| Upfront cost | $0, financed over 84 months | Paid in full before you know if it works |
Professional installation is the difference between an alarm you arm every night and one you quietly stop using after the third false trip.
Alarm registration rules vary city by city across Utah, Colorado, and Idaho. Some municipalities require a one-time registration, some charge for repeated false alarms, and many require nothing at all. We research the rules for your specific address before install day and walk you through anything that applies.
Because our systems are configured and tested to avoid false alarms, the fines some homeowners rack up with a kit are not a problem we see with HYVE clients.
If you already have an alarm from ADT, Vivint, AMP Smart, or another company, a lot of the wired contacts and sensors can usually be reused. We start with a free contract review, tell you what carries over, and in many cases buy out the remaining term so you can switch without paying twice.
Headquartered in Saratoga Springs. Wasatch Front, Utah County, Davis, Weber, Cache, and St. George. Utah service area →
Denver metro, Colorado Springs, Fort Collins, and the Front Range. Same crew standards, same no-contract terms. Colorado service area →
Boise, Meridian, Nampa, Idaho Falls, Pocatello, Twin Falls and statewide. Idaho service area →
Free walk-through, written plan, no contract, nothing upfront.
We'll reach out shortly — usually within the hour during business hours. Welcome to the colony.
Get a free custom quote — no contracts, no upfront costs, no pressure.
Send "free quote" and a real person will text you back — usually within the hour, Mon–Sat 8am–7pm.