A camera in the wrong spot is a decoration. HYVE walks your property, maps the approaches an intruder would use, and installs a custom 4K camera system around them — in Utah, Colorado, and Idaho, with no contracts.
Most camera systems fail at the design stage, not the hardware stage. This is the sequence we run on every property, from a Lehi cul-de-sac to a Colorado Springs acre lot to a Boise foothills home.
We walk every path to your home the way an intruder would: driveway, side gates, back fence line, detached garage. Those approaches, not the walls, decide where cameras go.
A wide-angle lens over a patio and a narrow lens aimed down a driveway solve different problems. We match lens, resolution, and mounting height to what each camera must capture — a face, a plate, or a wide scene.
Porch lights, street lights, snow glare in January, and total darkness along a side yard all change the sensor we choose. Where it matters, we tie exterior lighting to motion so footage is usable at 2am.
Exterior cameras record continuously to a local recorder. Clips also go to the cloud for alerts and off-site backup. You get both, so one failure never costs you the footage.
Off-the-shelf cameras get mounted where there happens to be an outlet and WiFi signal — the porch and the garage. That leaves the side gate, the basement window well, and the back fence completely uncovered, which is exactly where forced entries happen.
They also depend on your home WiFi. When the signal drops, the camera drops. When the internet is cut, the recording stops. HYVE cameras are hardwired for power and data wherever possible, with cellular backup on the panel so alerts still reach you.
Our standard is simple: every entry point covered, every approach seen before it reaches the house, and footage you can actually use.
Motion-only clips miss the first seconds of every event. HYVE systems record exterior cameras continuously, so you can scrub back to see the car pull up, not just the person at the door.
Cameras, alarm, locks, lights, and doorbell live in a single Alarm.com app. A motion event can arm the alarm, flip on the floodlights, and save the clip — automatically.
Licensed technicians route cable through attics and wall cavities and seal every exterior penetration. No stapled wire runs on your siding.
The workhorse for driveways, approaches, and perimeter lines. Weather-sealed, long-range IR, and the clearest option for identifying people and vehicles.
For patios, entry foyers, and garages where you need to see a whole area from one corner. Vandal-resistant housings for exposed positions.
Two-way audio, package detection, and a visitor history. Integrated with your locks so you can see, talk, and let someone in from your phone.
Pan-tilt-zoom and long-focal cameras for large lots, shops, horse property, and commercial yards across rural Utah, Colorado, and Idaho.
Discreet indoor cameras for nurseries, home offices, and caregivers — on privacy schedules you control, so they're off when you're home.
Light and lens in one unit for dark side yards and detached buildings, with motion-triggered illumination that doubles as a deterrent.
HYVE is headquartered in Saratoga Springs, Utah, and installs across all three states with the same crew standards. Every project starts with a free on-site camera design.
Headquartered in Saratoga Springs. Wasatch Front, Utah County, Davis, Weber, Cache, and St. George. Utah service area →
Denver metro, Colorado Springs, Fort Collins, and the Front Range. Same crew standards, same no-contract terms. Colorado service area →
Boise, Meridian, Nampa, Idaho Falls, Pocatello, Twin Falls and statewide. Idaho service area →
We walk your property, map the blind spots, and give you a written plan — no contracts, no upfront cost.
We'll reach out shortly — usually within the hour during business hours. Welcome to the colony.
Get a free custom quote — no contracts, no upfront costs, no pressure.
Send "free quote" and a real person will text you back — usually within the hour, Mon–Sat 8am–7pm.